Point Sur
R/V Point Sur

Ceilometers are ground-based, remote-sensing sensors that provide measurements of cloud ceilings and vertical visibility. They use either a laser beam or another light source to detect backscatter of clouds, precipitation, and aerosols. Ceilometers can provide detailed and accurate measurements in all types of weather conditions and have low operating costs. Ceilometers are typically used in boundary layer and cloud research applications.

This data will be added in future versions

Aethalometer is an in situ aerosol instrument manufactured by Magee Scientific that can be deployed on either airborne or ground-based platforms. It samples aerosols through a filter tape and measures the attenuation of transmitted light to determine the concentration of black carbon particles. The Aethalometer operates across seven optical wavelengths (370, 470, 520, 590, 660, 880, and 950 nm) and can provide data at a rate of 1 Hz. It has a measurement range of 0-500 μg per cubic meter and a resolution of 0.1 μg per cubic meter.

This data will be added in future versions.

The Pandora Spectrometer System is a ground-based UV-VIS spectrometer used to measure column amounts of trace gases in the atmosphere. It uses total optical absorption spectroscopy for retrievals of ozone, nitrogen dioxide, formaldehyde, and other trace gases. Pandora operates in the 280-525 nm spectral region at a resolution of 0.6 nm. It can make both direct sun and all-sky radiance measurements and has an overall measurement time of 80 seconds. Pandora is a part of a network of identical instruments known as the Pandonia Global Network.

The Picarro gas concentration analyzer is an in situ airborne or ground-based sensor manufactured by Picarro, Inc. It uses Wavelength-Scanned-Cavity Ring Spectroscopy (WS-CRDS) to measure trace gases such as carbon dioxide, carbon monoxide, methane, and water vapor. For carbon dioxide measurements, the laser within Picarro operates at 1603 nm wavelength and 1651 nm wavelength for methane and water vapor measurements. Picarro has a typical sampling time of 2.5 seconds. Depending on the model, Picarro can also provide measurements of carbon isotopes for gas concentrations.

If instrument model information is not available, can use this instrument entry for temperature, pressues, wind speed, wind direction, humidity

If instrument name or model is not available but documents show that specific chemical compounds or constituents or their properties were observed, can use instrument entry. Examples include: CO, CO2, NO, NO2, N2O, HNO3, HNO4, OH, H2SO4, CH3CN, O3, H2O, halocarbons, VOCs, nitrates, aerosols (including CCN), aerosol optical properties, etc...